You can get the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black # 295-000019 and select the keyed alike option.
The same goes for the Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 7/8" Long # 295-000003. You can get them keyed alike. view full answer...
In order to get the same keys you will need to replace the lock cylinders on all of the latches you want keyed alike. To do this though, you do need to measure the cylinders themselves in order to get the correct size:
-Replacement Cam Lock Cylinder for RVs - 7/8" Long # 295-000003, 1-1/8" Long # 295-000004, 1-3/8" Long # 295-000005, 1-3/4" Long # 295-000077.
Once you find the correct length (or lengths) you will want to select "Keyed Alike" from the drop-down menu on the product pages... view full answer...
I do have an option for you but the Replacement Key for Global Link RV Locks - 315 part # 295-000041 will not work. If you have a Global Link RV Lock then you will need to use the Replacement Key for Global Link RV Locks - 374 part # 295-000153. If you don't have a Global Link RV Lock the only option we can offer you is the Global Link RV Entry Door Locking Latch Kit part # 295-000019. view full answer...
It sure will. With a few exceptions, weight distribution shanks have the same 1-1/4 inch hole spacing. The Curt # C17122 weight distribution shank will work perfectly with the Reese # RP66020 600 lb tongue weight capacity system you referenced. view full answer...
Sorry to hear your Gustafson RV LED Dome Light w/ Button # 277-000492 aren't working properly!
Since the LED strip in # 277-000492 is permanent to the unit, the only way to get a new LED strip is to purchase an entire assembly, unfortunately.
But, before you do that, if you haven't already I recommend checking your ground connections for these lights as this is the most common reason LEDs don't function as intended.
I know it's not ideal, but if you've verified that all of your lights... view full answer...
I'm sorry to hear about your stolen awning. I'm sure that's been extremely frustrating to deal with.
The Solera XL Power Awning Roller Assembly # LCV000334998 (whether you're looking at the new item or the used listing) comes with the awning fabric and the roller assembly (body tube) only. If you're needing the arms and rail extrusion to connect the awning to your RV then you'll also need the Solera XL Power Awning Support Arms # LC362241, Rail Extrusion # LC715216, Butyl Tape # 344270341411-1... view full answer...
There are a handful of reasons why the arm on your Lippert Solera awning might be bent; it could be a part (like the shock), sudden gusts of wind, too much weight from rain, or even something getting stuck in the track while you're retracting it. The last problem seemed to be the most common when I was looking at forums online.
Lippert has complete replacement awning support arms like the Solera 66-1/8" Pitched Awning Support Arm, Black # LC266169 that will remedy the problem if you get... view full answer...
The Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors - 30" Lift - 6,000 lbs # UF39-941705 is not designed to lift the trailer but rather to help stabilize the trailer. Due to the dual motors it is easier to help stabilize the trailer in a way that helps it level side to side without any lifting required. This would be a nice upgrade from your LCI electric leveling system. You would need two of these stabilizers for your trailer weight (one for each end) because a centrally... view full answer...
Go To Results